Eyelet Specification
Steel wire components contain precise openings to guide warp yarns during harness movement on the loom. The heald eyelet dimension governs the maximum yarn diameter that can pass through the harness without causing excessive friction. Coarse linen yarns demand larger apertures to accommodate natural variations in slub size and fiber bundles.
If the opening is too small, yarn passage becomes restricted and causes immediate breakages. Technical departments determine these parameters prior to warp preparation to align the loom components with the specific linear density of the linen yarn batch.
Friction Mitigation
Surface contact between yarn and metal creates abrasive forces that weaken flax fibers during shedding cycles. An optimal heald eyelet dimension balances yarn guidance with free space to minimize heat generation. When the aperture aligns with the yarn count, the warp moves smoothly with minimal tension peaks.
Smooth movements prevent the accumulation of lint and loose fibers that clog the loom mechanism.
Shed Clearance
Loom settings dictate the height of the warp separation required for the insertion of the weft yarn. Adjusting the heald eyelet dimension ensures that the yarn has enough vertical play during the shed opening. Inadequate clearance results in fuzzy yarn surfaces due to continuous scraping against the steel edges.
Textile mills specify these measurements on technical purchase sheets to match the yarn profiles.