Geometrical Limit
Mechanical alignment of jacquard looms includes the measurement of the inclination of the cord as it runs from the comber board to the heald. The harness cord angle represents this inclination, which determines the lateral force exerted on the guide boards and the warp yarn. If this parameter is too large, it increases friction and accelerates the wear of the components.
Maintaining a small value is essential for preserving the integrity of the linen warp during high-speed production.
Wear Effect
Excessive deflection accelerates the degradation of both the cords and the holes in the comber board through which they pass. This friction leads to premature wear, causing individual warp threads to lift unevenly and resulting in fabric defects in the woven linen. Plant operators measure the angle to determine when to adjust the height of the harness or the comber board.
Deflection Calculation
Industrial standards limit the maximum allowable angle to prevent excessive rubbing and mechanical failure. Calculating the lateral displacement involves measuring the distance from the outermost harness cord to the center line of the loom relative to the height of the comber board. Keeping the deflection within this limit ensures consistent shedding and uniform linen fabric quality.