Mechanical Interface
Rows of steel pins mounted on a bar penetrate the flax fibre bundle to align individual filaments. These hackle gills operate within the combing machine to remove short fibres and residual woody shives from the long flax strick. Movement of the bars ensures that the hackling process remains continuous as the material travels through the mill.
Pinning Density
Precise spacing between the pins determines the final fineness of the combed flax. High density hackle gills are required for fine yarn counts where maximum parallelization is necessary. Coarser pins are used in the early stages of processing to prevent fibre breakage while removing the bulk of the non-fibrous matter.
The selection of pin diameter and length impacts the yield of long fibre versus tow.
Maintenance Protocol
Periodic inspection of the metal pins prevents defects in the resulting sliver. Bent or blunted hackle gills cause uneven drafting and can lead to the formation of neps or clusters of tangled fibre. When a pin fails, the entire gill bar is often removed from the circuit to ensure that every pass through the machine maintains a uniform density.
Regular cleaning removes accumulated pectin and wax that might otherwise cause the fibre to stick to the metal surface.