Torsional Method
Mechanical processes in the preparation of linen roving utilize a specific rotational action to consolidate fibers. Through flyer twisting, the mill adds a controlled number of turns per meter to the sliver as it passes onto a bobbin. This motion occurs when the roving enters the top of a hollow arm and exits through a presser finger.
Rotational Mechanism
The spindle and flyer rotate at slightly different speeds to create the winding tension and the necessary twist. While the roving moves through the flyer arm, the centrifugal force keeps the strand against the inner wall to prevent premature breakage. Because flax fibers are relatively inelastic, the speed of flyer twisting must remain constant to avoid thick or thin spots in the roving.
The presser finger exerts a specific load against the bobbin surface to build a dense package that will not collapse during the subsequent wet spinning process. Each revolution of the flyer relative to the delivery speed of the front rollers determines the final turns per meter.
Tensile Integrity
Low levels of twist allow for easy drafting in the final spinning frame while higher levels prevent the roving from pulling apart during handling. Proper flyer twisting ensures that the roving can withstand the heat and moisture of the spinning trough. If the twist is too high, the fibers will not slide past each other during drafting, which causes yarn irregularities.
This mechanical stability is necessary for high speed spinning.