Winding Force
Roving frames utilize a rotating arm and spindle mechanism to twist and wind drafted flax fibers onto a bobbin. The flyer tension describes the mechanical pulling force exerted on the fiber strand as it travels from the flyer head to the bobbin surface. Maintaining this force within narrow limits is necessary to prevent premature stretching or breaking of the weak, low-twist rove.
Tension records are monitored continuously by the frame control system and logged in the spinning shift report.
Mechanical Control
Regulating this force relies on coordinating the rotational speed of the spindle and the flyer. Because the winding diameter of the bobbin increases continuously during the run, the flyer tension must be adjusted dynamically by the machine drive system. In modern mills, programmable logic controllers automatically adjust the bobbin speed relative to the flyer speed according to a pre-set curve.
For older mechanical frames, the tension must be adjusted manually by changing the tension gears or adjusting the build motion friction plates. A mechanical supervisor must verify these manual gear changes by checking the roving diameter with a yarn gauge at the start of each new shift.
Package Density
Excessive tension forces lead to stretched roving and frequent machine stoppages. When the flyer tension is too high, it drafts the fibers prematurely, which causes thin spots that later become weak points in the spun yarn. Conversely, low tension causes the roving to slacken, leading to tangles and snarled yarn packages.
If these yarn packages fail the mill’s visual quality checks, they are rejected before reaching the wet-spinning room, which is recorded in the spinning reject log.