Linear Spacing
Linear spacing between the fine steel pins mounted on the faller bars of a drawing frame determines the degree of control exerted over fibers during processing. In flax preparation, the faller pin pitch must match the thickness and length of the sliver to prevent fiber damage. A close pitch is selected for fine flax line fibers, whereas a wider pitch is used for coarser tow fibers.
The pins act as a comb that holds the fibers back while they are drafted, which ensures that only those gripped by the front rollers are drawn forward.
Draft Control
Fiber control within the drafting zone is maintained by the penetration of the pins into the moving fiber bed. If the faller pin pitch is too large, the fibers are not held securely, which causes thick places in the drafted sliver. In cases where the pitch is too small, the pins become choked with fibers, which halts the machine and causes friction damage to the flax.
Yarn Uniformity
Sliver uniformity and final yarn quality are optimized by selecting the correct pin density for each drawing passage. Adjusting the faller pin pitch allows mills to spin fine linen yarns with minimal nep counts. Proper maintenance of the pin strips prevents uneven drafting.