Wet Preparation
Liquid saturation is a preparatory step that softens flax roving before it enters the drafting zone of a wet spinning frame. In this system, creel immersion feeds the wound packages of roving through a heated water bath to loosen the pectin binding the individual fibres. This action allows the fibres to slide past each other during the subsequent drawing process.
Without this softening, the coarse flax bundles would resist drafting and break. The path through the liquid must be carefully aligned to maintain tension.
Moisture Absorption
Water temperature inside the immersion trough typically ranges between sixty and seventy degrees Celsius. Warm water accelerates the swelling of the gum-like pectin without washing it away entirely. The duration of the contact must be long enough to achieve uniform wetness through the entire thickness of the wound roving.
Poorly wetted sections cause uneven drafting and lead to thin spots in the yarn.
Yarn Quality
Softened pectin acts as a natural adhesive during the final drying of the spun yarn. When the wet yarn is dried on bobbins, the pectin solidifies and glues the fine fibres together. This bonding improves the tensile strength of the finished linen yarn.
Control of the wetting time prevents premature loss of these binders.