Extraction Ratio
Raw material processing metrics measure the proportion of short fibres and impurities removed during the combing phase of yarn preparation. The combing waste percentage represents the weight of the extracted noil relative to the total feed weight. This value indicates the cleanliness and length uniformity of the flax input.
Mills record this metric on the daily combing card to track the transition from raw scutched flax to combed sliver.
Quality Control
Fibre separation must balance the removal of undesirable short fibres with the retention of long line fibres. A higher combing waste percentage yields a stronger, more parallel combed sliver at the expense of yield. Spinning mills adjust detaching distances to stay within the limits agreed upon in buyer contracts.
Economic Impact
Financial calculations in spinning mills depend heavily on minimizing the waste generated during mechanical cleaning. For example, if a batch of flax has a feed weight of five hundred kilograms and results in one hundred kilograms of noil, the combing waste percentage is twenty percent. A deviation of even two percent from the target value can alter the profitability of an export yarn order.
Supervisors use these figures to evaluate whether the flax shipment from the supplier met the specified grade or if the raw material contains too many immature fibres.