Fiber Bundling
Plant polymers located in the middle lamella of flax stems secure the individual fiber cells into cohesive bundles. This calcium pectate binder represents the primary structural cement that must be partially degraded during retting to allow fiber separation. If too much of this binding substance remains, the flax stems resist decortication and yield coarse, stiff bundles.
Mechanical extraction requires a precise reduction in this compound to liberate fine spinning fibers without destroying the structural strength of the cellulose chains that form the core of the textile material.
Retting Control
Controlled moist environments promote fungal and bacterial growth that releases pectinases to break down the adhesive matrix in the straw. This biochemical activity targets the calcium pectate binder while leaving the core cellulose fibers intact. Monitoring the concentration of dissolved galacturonic acid in the retting wastewater indicates the progress of this extraction.
When the retting process reaches completion, the stalks are dried to halt further enzymatic activity.
Spinning Suitability
High residual concentrations of pectin compounds increase the resistance of the roving during wet spinning. Warm water baths used during the spinning process soften the calcium pectate binder, which enables the fibers to slip past one another and draw into fine yarns. Uncontrolled removal of this material during pre-treatments weakens the wet-spun yarn because the individual cells lose their natural anchoring.