Quantity Variance
An adjustment factor accounts for moisture and impurity loss when calculating the commercial weight of flax fiber during high-temperature testing. The boiling weight deficit represents the difference between the original conditioned mass and the mass remaining after a standardized boiling procedure in a laboratory environment. This figure establishes the true fiber content of a raw shipment.
It prevents overpayment for non-fibrous materials that do not contribute to the final textile structure.
Testing Protocol
Technicians extract a representative sample from a bale and subject it to a controlled boil to isolate the cellulose from lignified tissues. The boiling weight deficit is calculated by weighing the sample at a fixed moisture regain percentage following the chemical removal of fats and pectic substances. Higher levels of residual shives or bark in the flax increase this deficit notably and suggest poor initial retting.
It acts as a primary quality gate in Chinese mill procurement where raw material consistency is essential for high-speed spinning.
Contractual Boundary
Shipping documents specify the maximum allowable percentage for this loss to protect the buyer from low-yield raw materials. If the boiling weight deficit exceeds the agreed threshold, the supplier must issue a credit note or accept a lower unit price for the affected lot.