Process Evaluation
Enzymatic wet processing removes surface fuzz from woven linen fabrics inside jet dyeing machines or continuous washing ranges. The rate of biopolishing weight reduction measures the mass lost by cellulose fibers when cellulase enzymes cleave amorphous surface microfibrils. Dyeing plant inspection logs document this weight change alongside fabric tensile strength loss and pilling resistance grades.
Laboratory technicians calculate mass loss by weighing oven-dried fabric specimens before and after enzyme treatment. Control of treatment duration prevents excessive degradation of the underlying yarn structure.
Hydrolytic Mechanism
Cellulase enzymes bind to specific crystalline sites on protruding flax fibers to catalyze the hydrolysis of beta-1,4-glucosidic bonds. Endoglucanases random-cleave internal cellulose chains while exoglucanases trim cellobiose units from chain ends, releasing soluble sugars into the liquor. Mechanical agitation during liquor circulation snaps the weakened surface fibrils away from the yarn core, resulting in controlled biopolishing weight reduction across the fabric batch.
Temperature control between fifty and sixty degrees Celsius optimizes enzyme activity, while buffer additives maintain pH between four point five and five point five. Over-exposure degrades core cellulose microfibrils, severely impairing fabric tearing strength and burst resistance. Plant operators terminate the reaction by raising liquor temperature above eighty degrees Celsius or elevating pH to alkali levels.
Post-treatment washing steps flush residual enzyme proteins and hydrolysed glucose fragments from the textile substrate.
Quality Limit
Finished fabric standards permit a maximum mass loss of three to five percent during enzymatic finishing. When biopolishing weight reduction exceeds five percent, fabric tearing strength drops below acceptable commercial thresholds.