Constitutive Model
Non-Newtonian fluid mechanics classifies materials that behave as rigid bodies under low shear stress but flow as viscous fluids once a finite yield stress threshold is exceeded. In wet flax processing, sizing formulations and chemical treatment baths frequently behave as a Bingham plastic because concentrated natural polymers and suspended pectins form an internal structural network that resists initial deformation. Shear stress remains linear with shear rate only after this yield stress is broken.
The model governs paste formulations applied during wet treatment, where sizing or printing pastes must resist sagging on the yarn while yielding predictably under mechanical roller pressure. Fluid behavior transitions to pure pseudoplastic thinning when polymer concentrations shift or temperature increases beyond structural gel points.
Rheological Evaluation
Laboratory rotational viscometers measure the shear stress profile across stepped shear rates to derive the yield point and plastic viscosity on the chemical inspection sheet. Sizing formulations based on modified starches or carboxymethyl cellulose exhibit distinct yield points that prevent premature migration into inner yarn channels prior to the nip roller contact point. When applied shear exceeds the critical threshold, internal molecular chains untangle, and viscosity drops along an affine slope.
Process control records record yield values alongside Brookfield single-point readings to track formulation stability before warp sizing runs. Lower paste viscosity during high-speed rolling ensures smooth liquid transfer onto coarse flax yarns. Rest periods allow the material to rebuild internal resistance, preventing run-off during hot drying passages.
Coating Behavior
Thickened finishing compounds rely on this threshold mechanism to deposit a uniform topical layer on porous flax surfaces without uncontrolled core saturation. Mill operators adjust solid content to ensure the yield stress prevents dripping between applicator rolls and yarn guides. Excessively high yield points cause uneven paste spreading, resulting in cloudy patches on dense linen surfaces.
Insufficient yield stress allows sizing to bleed deeply into the inner core, depriving the yarn surface of essential abrasion resistance during high-speed air-jet weaving. Precise chemical formulation locks the applied sizing onto peripheral bast fibres, and this mechanical barrier preserves warp continuity against harness friction throughout shed opening cycles.