Fibre Composition
Organic impurities associated with flax fibres determine the spinning behavior and final texture of linen yarn. These substances, known as bast non-cellulosics, consist of pectins, hemicellulose, lignin, and waxes that bind the individual fiber bundles together within the plant stem. Removing a specific portion of these materials during processing is necessary to achieve the desired fiber fineness.
Raw flax contains approximately twenty to thirty percent of these non-cellulosic elements before any treatment begins.
Extraction Processing
Chemical boiling and enzymatic treatment remove the gum-like pectin layer during the scouring of the flax fibers. Unrefined straw requires controlled retting in water or dew to allow microorganisms to break down the tough outer bark without degrading the cellulose core. During this stage, the content of bast non-cellulosics is reduced to make the fiber bundle split into finer filaments that can be spun into high-grade yarns.
Insufficient retting leaves the fibers stiff and brittle, which leads to frequent breakage on the spinning frame, whereas over-retting destroys the structural integrity of the cellulose itself and weakens the yarn.
Quality Metric
Measurement of the remaining pectin and wax content is recorded in the laboratory analysis of the spun yarn. A high percentage of remaining bast non-cellulosics limits the dye uptake of the finished fabric, resulting in uneven coloration across the fabric surface. This analysis helps spinners adjust their scouring formulations to match the requirements of the textile mill.