Fluid Transmission
Interstitial void structures govern the transmission of fluids and processing liquors through compressed masses of flax stems or extracted bundles. Bast fibre permeability quantifies the ease with which water, chemical reagents, and conditioned air pass through packed cellulosic beds during processing. Specific resistance values depend heavily on bundle fineness, alignment, packing density, and residual hydrophobic waxes.
Loose stricks of scutched flax permit rapid liquid transit through longitudinal inter-fiber channels. Dense, uncombed tow agglomerations restrict liquor migration and generate uneven pressure drops across chemical treatment vessels. Wetting behaviour alters dynamically as pectic matter dissolves and fiber bundles separate into finer technical filaments.
Measurement of this parameter ceases once yarns are spun into tight geometric structures where yarn twist dominates fluid transport.
Testing Method
Permeability assessment employs constant-rate differential pressure manometers connected across hermetically clamped cylindrical fiber chambers. Technicians condition combed sliver samples under standard atmospheric conditions before packing a specified mass into the test cell. Regulated air flows through the fibrous plug while differential pressure transducers measure resistance across the sample face.
Parallel wet testing pumps demineralised water through packed slivers inside stainless steel kier simulators to measure wetting resistance. Uneven liquor flow indicates excessive cortical shive contamination or inadequate pectin removal. Technicians record volumetric flow rates across three duplicate specimens to compute specific fluid permeability constants.
Results enter the mill laboratory information system alongside raw fiber bundle diameter measurements.
Spinning Impact
Low fluid transit rates impede uniform dye penetration during package dyeing and cause uneven core wetting in yarn bleaching. Chemical degumming processes require high permeability to guarantee uniform liquor contact across the entirety of raw roving bobbins. Non-uniform resistance results in localized over-treatment alongside unboiled fiber cores within the same kier.
Spinning consistency improves noticeably when permeabilities fall within stable, narrow ranges across imported flax lots.