Defect Valuation
Standardized visual fabric inspection protocols assign numerical penalty points to fabric defects based on their linear length along the bolt. Under astm d5430 scoring, defects up to three inches receive one point, defects between three and six inches receive two points, defects between six and nine inches receive three points, and defects exceeding nine inches receive four points. Inspection teams apply this four-point system during grey fabric room evaluation and final export rolling.
No single linear yard receives more than four penalty points regardless of defect count.
Penalty Calculation
Mill quality departments aggregate total penalty points per hundred linear yards to calculate a normalized fabric grade. Inspectors record continuous slubs, warp floats, reed marks, or oil stains on illuminated inspection tables running at speeds below fifteen meters per minute. The calculated point total per hundred yards establishes whether a linen roll meets first-quality buyer specifications or requires downgrade to second-quality stock.
Continuous selvedge defects or full-width bow and skew are assessed under separate provisions within the inspection protocol.
Acceptance Threshold
Compliance boundaries for finished linen exports depend on targeted end-use requirements set by foreign buyers. High-density dress weight fabrics strictly limit allowable points to twenty per hundred square yards, whereas heavy coarse duck fabrics permit up to forty points. The system does not measure physical tensile strength or color fastness, which are determined through destructive laboratory testing.