Conversion Strategy
Industrial retrofit processes modify existing projectile or rapier machinery to utilize compressed air for weft insertion. An air-jet loom conversion replaces mechanical picking systems with a main nozzle, relay nozzles, electronic sensors and a profile reed to handle the high-speed requirements of modern production. The upgrade requires a stable air supply and precise timing controls to ensure the flax yarn travels across the wide reed space without snagging.
Retrofit Requirement
Installing new hardware involves mounting sub-nozzles along the sley and integrating an electronic valve control system. Because the air-jet loom conversion depends on consistent pressure, the mill must install high-capacity compressors and filtration units to prevent oil contamination from reaching the linen fabric. High-speed sensors track the weft arrival time to confirm completion of the pick.
Any deviation in the flight path triggers an immediate halt to prevent fabric flaws or broken picks in the fine linen weave. Precision matters. This modification allows older frames to compete with modern machinery outputs without the capital expenditure of entirely new looms.
Operational Limitation
Performance thresholds depend on the yarn count and the inherent hairiness of the flax fibres. While an air-jet loom conversion increases the picks per minute, it is less effective for very heavy slub yarns which resist air propulsion. The process stops being viable when the air consumption costs exceed the productivity gains from increased weaving speed.