Lighting Specification
An environmental testing condition specifies the intensity and angle of light directed onto a fabric during visual assessment. In linen mills, surface illumination provides the precise lighting required to expose irregularities on the face of the woven cloth without creating deceptive shadows. This specification governs the light level, typically measured in lux, and the positioning of overhead luminaires during the final quality check before packaging.
It applies to the detection of surface defects and does not cover the transmitted light used to check density.
Detection Mechanism
Inspectors depend on this controlled lighting to identify subtle faults such as fine slubs, warp tension streaks, or uneven dye application. Correct surface illumination ensures that the light level, typically measured in lux, remains constant across different shifts and inspection stations. If the light is too dim, critical defects will be missed, while overly bright light can cause eye fatigue and reduce accuracy.
Positioning the light source at an angle of forty-five degrees to the fabric surface enhances the visibility of raised fibers and weave patterns.
Operational Limit
While surface illumination is essential for human graders, digital cameras use different spectral ranges to detect faults. Adherence to these lighting standards ensures consistent grading between the mill and the buyer. This process guarantees that both the producer and the exporter evaluate the linen cloth under identical visual conditions.