Thermal Moisture Removal
Heat transfer through pressurized rotating metal surfaces reduces the water content of textile webs after the washing and sizing stages. Steam cylinder drying applies saturated steam internally to cylindrical shells which conduct thermal energy to the passing flax fabric. This process governs the evaporation rates for high-density linens prior to final calendering.
Evaporation efficiency depends on the internal pressure of the steam and the surface temperature of the shell.
Operating Parameters
Tension control prevents fabric distortion when the wet material contacts the hot metal surface of the cylinder. Operators monitor the rotational speed to ensure the contact time matches the moisture reduction requirements for specific linen weights. Condensate removal occurs through internal siphons that prevent water accumulation and maintain uniform heat transfer across the width of the cylinder.
Any buildup of condensate reduces thermal efficiency and creates temperature gradients across the fabric.
Production Quality
Surface contact against polished steel surfaces improves the dimensional stability and hand of finished linen. Excess heat causes yellowing or fibre degradation in natural flax so precise temperature regulation protects the integrity of the textile. Mill specifications define the acceptable moisture regain levels for export-ready fabric after the final cylinder passes.
Consistent thermal application ensures that the moisture content remains stable throughout the roll.