Vibration Profile
High-frequency mechanical oscillations generated by metallic card clothing wire teeth interacting with raw flax fibers produce distinct acoustic and vibrational spectra during carding. In flax spinning preparation, sawtooth peak frequency identifies the dominant frequency peak recorded by vibration sensors mounted on carding cylinder bearings. On-line monitoring systems log this frequency value in hertz to assess metallic wire wear and fiber tuft opening efficiency.
The physical metric measures mechanical vibration during fiber carding and does not apply to drawing or ring spinning operations.
Signal Analysis
Wire point density, cylinder rotational speed and fiber loading directly dictate the spectral peak position. As wire teeth become dull or bent through prolonged processing of dusty scutched flax, the characteristic frequency shifts toward lower bands and broadens in bandwidth. Predictive maintenance software analyzes real-time sensor streams to detect tooth damage before nep formation increases in the card sliver.
Mill technicians calibrate sensor sensitivity using reference calibration blocks during routine machine overhauls.
Operational Limit
Excessive vibration amplitudes at the primary frequency indicate mechanical unbalance or improper wire clothing installation. Immediate machine shut-down prevents catastrophic damage to the cylinder wire. Production logs confirm that maintaining normal sawtooth peak frequency correlates directly with low sliver irregularity values.