Measurement Error
Measurement error occurring when a non-circular flax fibre is viewed from a single angle causes a deviation in recorded diameter. Projection bias results in an inaccurate assessment of the fineness of linen yarns. This optical phenomenon is a known challenge in the quantitative analysis of bast fibres, which rarely possess a perfectly cylindrical shape.
Geometric Distortion
Light passing through a slide captures the maximum width of the fibre as it lies flat on the glass surface. Because the circularity of flax varies significantly, projection bias can lead to an overestimation of the average diameter by as much as twenty percent in some batches. Digital image analysis systems attempt to mitigate this by taking multiple measurements or using a correction factor based on the known typical eccentricity of the specific flax variety.
Analytical Impact
Relying on biased data causes issues during the blending stage, as the actual volume of fibre in the yarn will not match the calculated specifications. Modern spinning mills in China often use airflow methods or automated cross sectional analysis to provide a more accurate reading that is free from projection bias. The error is most pronounced in low grade, poorly retted flax where the fibre bundles are still heavily ribbon like.