Weave Density
When vertical yarn crowding reaches excess during the closing motion of the reed, pick compaction occurs as weft threads stack against each other in grey flax fabric. This phenomenon distorts the intended warp to weft ratio on the loom beam. Operators measure the resulting square centimeter discrepancy against the technical sheet provided by the buyer.
Fabric grade diverges sharply from fibre grade when this crowding alters the hand feel of linen cloth. Mills apply internal tolerances that are tighter than standard commercial acceptance limits to prevent rejected shipments at port.
Stress Threshold
Loom speed increases generate excessive kinetic force that drives consecutive weft insertions beyond the permitted spacing boundary. Mechanical regulators control the backrest displacement to relieve excessive tension during high humidity shifts. Yarn strength must withstand the sudden deceleration without snapping inside the heald frames.
Technicians calibrate the eccentric shaft settings to distribute mechanical load evenly across the entire weaving width.
Export Standard
Final inspection protocols demand verification of thread spacing before bales leave the warehouse floor. Independent inspectors verify compliance with international textile agreements using optical magnification tools under standard daylight conditions. Documented test results accompany every bill of lading for customs clearance in destination markets.
Commercial penalties apply automatically when delivered density falls outside the agreed contractual window.