Operational Failure
Discontinuities occurring within the fiber strand during the attenuation process on a spinning frame represent a loss of structural integrity. These drafting breakages happen when the force required to slide fibers past each other exceeds the tensile strength of the roving. They force a machine stop and require manual or automated piecing, a knot, a slub, a section of immature fiber or a weakened filament to resume production.
Tension Mechanism
Drafting rollers set at specific distances and speeds create a gradient of tension that pulls the flax fibers into a finer stream. When the drafting breakages occur, it is often due to improper roller settings or excessive friction from high humidity in the mill environment. A sudden snatching motion between the back and front rollers snap the fibers rather than drawing them out smoothly.
This creates a thick place or a complete gap in the yarn. Spinners monitor the draft ratio to ensure the roving does not pull apart under the load.
Material Limit
Limits on the frequency of these events are set by the mill’s efficiency targets and the grade of the input material. If the rate of drafting breakages exceeds a set threshold per thousand spindle hours, the batch is often re-evaluated for its wax content or fiber length distribution. Spinners adjust the pressure on the top rollers to compensate for variations in fiber lubricity.