Mechanical Limit
The minimum rotational force required to prevent slippage between individual flax fibres during the drafting stage of wet spinning defines this property. Operating below the cohesive twist threshold results in a loss of yarn integrity as the untwisted sliver fails to resist the tension of the rollers. This value depends on the friction coefficient of the wet flax and the length of the constituent fibres.
Drafting Regulation
Control systems in Chinese mills monitor this limit to maintain consistent yarn density across large batches. If the cohesive twist threshold is set incorrectly, the resulting yarn exhibits thin spots or slubs where fibres have drifted apart without sufficient engagement. Mill technicians adjust spindle speeds relative to delivery rates to stay above this critical mark.
This adjustment becomes difficult when the flax roving contains high moisture levels, as water acts as a lubricant and reduces inter-fibre friction. Precise calibration prevents the roving from snapping or stretching unevenly during the passage through the drafting zone.
Production Stability
Spinners rely on this metric to calculate the maximum throughput possible for a given flax grade without risking excessive breakage. Higher grade flax with greater surface roughness allows for a lower cohesive twist threshold, which increases overall spinning efficiency. Consistent monitoring ensures that the yarn meets the tensile requirements specified in export contracts.