Yarn Classification
Electronic yarn clearing systems categorize yarn imperfections by their length and cross-sectional thickness. In the production of fine linen, classimat faults represent specific deviations from the standard yarn profile that are recorded during the winding process. These deviations are grouped into standard classes to evaluate yarn quality before loom operation.
Production Management
Machine operators analyze the frequency of yarn defects to adjust the draft settings and carding speeds on the spinning frames. Frequent occurrences of classimat faults often point to inadequate scutching or poor draft distribution in the drawing frames of the mill. When these defects exceed the buyer’s accepted tolerance limits, the yarn lot must be downgraded or routed to lower-grade textile applications.
This corrective action ensures that only yarns with an acceptable distribution of thick and thin places proceed to the warping beam.
Fabric Inspection
Finished fabric appearance depends heavily on the pre-clearing of yarn during the winding stage. Unchecked classimat faults would appear as visible slubs or thin spots in the manufactured linen, leading to high rejection rates during the buyer’s final visual audit. Most export contracts specify the maximum number of such defects permitted per hundred thousand meters of yarn.
The mill uses these figures to configure the yarn clearers.