Metallic Cylinder
Continuous steel strip with stamped teeth is wound tightly around the main cylinders of processing machines to execute the opening of flax strands. This metallic ribbon, called card wire clothing, provides the rigorous mechanical combing needed to separate stubborn bast bundles into individual fibers. It is engineered to withstand the abrasive action of unrefined flax stems and shive.
The selection of this surface depends entirely on the mill’s raw material profile, with harder wires chosen for lower-grade imports that contain more woody contaminants. Wire lifespan is measured in operating hours and directly affects the consistency of the drawn sliver.
Wire Geometry
Tooth angles and heights are configured to prevent excessive fiber breakage during high-speed rotation. Coarser flax requires a more aggressive tooth pitch to split the tough bundles without loading the wire. The wire teeth must release the combed flax sliver smoothly to the doffer cylinder.
This geometry is adjusted for different yarn counts.
Carding Efficiency
The removal of straw fragments is the primary measure of carding performance in linen production. Worn card wire clothing fails to catch short fibers, resulting in uneven slivers that break during spinning. Inspection schedules ensure that teeth remain sharp and properly aligned.
Regular maintenance prevents yarn defects.