Mechanical Interface
Mechanical surfaces studded with wire teeth cover the cylinders of textile processing machinery to separate and straighten raw flax fibres. This system, known as card clothing, consists of either flexible wire foundation strips or metallic wire wound directly onto the cylinder rollers. The action of these teeth against each other separates tangled clumps of bast fibres into a parallel arrangement of individual strands.
It governs the transition from raw bundle to carded sliver. Workers monitor the pressure and spacing between these surfaces because incorrect settings will ruin the natural structure of the flax.
Wire Selection
Metallic wire shapes are chosen based on the grade of linen fibre and the desired throughput. A steeper angle on the teeth provides aggressive opening of coarse fibres, while a shallow angle prevents damage to fine flax. Mill operators select wire profiles that reduce the risk of fibre breakage during intensive carding.
This choice determines the final yarn uniformity.
Separation Standard
Fibre purity is measured after processing to ensure that shive and short fibres have been extracted. Standard testing of the carded sliver shows whether the card clothing has achieved the target parallelisation. If the wire is worn, nep count rises, which degrades the subsequent spinning process.
Correct maintenance ensures consistent yarn strength.