Extraction Process
Mechanical separation of useable cellulosic material from the outer bark and inner core of flax stems constitutes the initial phase of processing. Through bast fiber extraction, mills obtain the long bundles required to produce high-grade linen yarns. This phase occurs after retting, when the chemical bonds holding the fibers to the woody stem have been weakened by moisture and bacteria.
The mechanical force applied during this step must be carefully calibrated to release the fibers without tearing them. If the extraction is too aggressive, the fibers are shortened, reducing their value for fine yarn production. Conversely, insufficient force leaves too much woody material attached to the fibers, which increases the amount of processing required in subsequent combing stages and raises production costs.
Decortication Method
Industrial scutching and hackling machinery provides the physical force necessary to detach the unwanted woody parts from the valuable cellulose bundles. Proper bast fiber extraction minimizes the remaining shive content, which is a major quality factor for spinning mills. Mill operators adjust the clearance between the fluted rollers and the beating blades to suit the thickness of the straw.
The resulting fiber bundles are graded based on their length, cleanliness, and strength, and this grading is recorded in the mill production log. High-quality extraction produces long, aligned fibers that require less refining in later stages.
Fiber Yield
The mill extraction report lists the final weight of clean fibers recovered from each batch of raw straw. This documented outcome allows the spinning mill to assess the efficiency of its raw material source and its extraction equipment. If the yield of long fibers falls below the established mill threshold, the extraction settings are re-evaluated, or the supplier’s raw flax is flagged for closer inspection.
The extraction report provides the baseline data used to calculate the economic yield of the processing run.