Surface Degradation
High-pressure drafting systems in linen wet spinning employ synthetic rubber aprons to control the movement of flax fibres through the drawing zone. Over time, apron glazing occurs when plant pectins and moisture combine under mechanical pressure to form a hard, glassy surface film. This polished deposit reduces the friction necessary for precise fibre guidance, which leads to drafting irregularities and increased yarn unevenness.
Slip Mechanism
Frictional contact between the rubber surface and the moving wet flax strand becomes compromised when the apron face loses its textured grip. This condition, known as apron glazing, permits bundle slipping during the attenuation process, causing uncontrolled drafting. Thick and thin places emerge in the drafted strand as the sliver passes through the nip rollers unevenly.
Spinners measure the degree of this defect by tracking draft force variations during yarn inspection.
Surface Treatment
Regular scouring and mechanical buffing cycles restore the original coefficient of friction to the rubber surface. Left untreated, the hardened film forces premature replacement of the entire drafting assembly, which increases operating costs. Chemical solvents can dissolve the pectin deposits, but manual buffing with fine abrasive paper provides the most durable restoration of the required gripping texture.
Regular inspection schedules prevent the defect from reaching the threshold where it degrades the final grade of the export yarn. Mills operating under strict buyer specifications run automatic cleaning rollers alongside the aprons to continuously strip the plant exudates before any film can accumulate.