Fabric Imperfection
Physical fabric imperfections consist of small punctures or distortions along the cloth edges caused by the gripping action of the weaving machinery. Identifying temple mark defects involves looking for irregular holes or pulled fibres where the metal pins have entered the fabric. These marks occur when the temple rollers apply too much pressure or use pins that are too long for the specific linen weight.
Management Strategy
Choosing the correct ring density and pin length is the primary method for avoiding these flaws. Because flax yarns are less resilient than cotton, temple mark defects can become permanent scars in the weave that do not close during finishing. The problem is worsened if the loom is run at a high speed with an aggressive take-up setting.
Operators must frequently inspect the rollers for bent pins or accumulated lint that might snag the delicate linen surface.
Acceptance Threshold
Buyers typically allow a small margin for these markings if they fall within the selvage waste area. If temple mark defects extend into the main body of the cloth, the roll is classified as a second. The presence of these punctures can cause the fabric to split during subsequent chemical treatments or mechanical softeners.