Fluid Dynamics
Fluid dynamics describes the average speed of a gas or liquid moving through a porous material as if the material were not there. In the context of linen finishing, superficial velocity is used to calculate the efficiency of air drying systems and chemical saturation baths. This value ignores the space occupied by the fibers and focuses on the bulk movement of the medium across the fabric surface.
Permeation Physics
Determining the superficial velocity requires dividing the total flow rate by the cross sectional area of the treatment chamber. A higher speed increases the rate of heat transfer during the drying of wet linen rolls. However, if the speed is too high, it can cause the fabric to flutter or become misaligned on the conveyor belt.
Processing Efficiency
Mills use this metric to optimize the energy consumption of large scale ovens. When the superficial velocity is tuned correctly, moisture is removed from the flax bundles at a uniform rate. In a liquid dye bath, this flow rate determines how quickly the exhausted dye is replaced by fresh solution at the fabric interface.
Pressure drop monitoring is standard. This check ensures that the fluid is penetrating the entire thickness of the material. This measurement is a standard part of the commissioning process for new finishing equipment.
Precise control of this velocity prevents the shading differences that occur when one side of a roll dries faster than the other.