Reed Motion
Mechanical insertion action in weaving looms pushes newly inserted weft yarn against the formed cloth fell using a reed mounted on an oscillating sley arm. The sley beat up compresses each pick firmly into the warp shed to establish target fabric pick density. Loom mechanics adjust crank arm geometry and beat-up timing to suit rigid flax yarns that require high impact force.
Weaving heavy linen fabrics demands precise beat-up alignment to prevent pick rebound and maintain uniform filling spacing across the fabric width.
Impact Dynamics
Dynamic force transmitted during pick compacting directly influences woven cloth density and structural warp tension. Dual crank drives swing the heavy sley forward at precise intervals in the weaving cycle, driving the reed grid against the fell line. When weaving stiff, low-elongation linen yarn, excessive beat-up force causes reed marks and warp end breakages behind the drop wires.
Loom tuners adjust sley eccentricity to increase dwell time, giving weft threads adequate time to settle into the weave structure before the shed changes.
Motion Limit
Compacting force settles weft threads into position but cannot correct uneven yarn diameter or spinning slubs present in the raw yarn. A sley beat up affects pick density exclusively during loom operation and has no role in chemical finishing or fabric washing.