Tension Distribution
Mechanical tension distributed across the width of the loom is a primary factor in preventing warp breaks and ensuring uniform pick density. The reed width tension refers to the variation in warp yarn tension from the selvages to the center of the loom during the looming process. In linen production, where flax fibers have very low elasticity, managing this tension profile is difficult because warp yarn cannot stretch to absorb peaks in load.
If the tension at the selvages is too high, it leads to frequent warp breaks and ragged edges. Spinning and fabric mills must adjust the tensioning rollers and warp beam to achieve a balanced profile across the entire reed.
Yarn Behavior
Low elasticity in bast fibers causes them to react sharply to any uneven stress across the loom. When the reed width tension is unbalanced, the warp threads in the tighter regions undergo higher fatigue and break during shed changes. This imbalance also causes the weft yarn to be beaten in unevenly, creating wavy patterns in the finished linen fabric.
Monitoring the tension of individual warp groups across the reed assists in maintaining consistent fabric width and density.
Loom Adjustment
Loom operators use specialized tension gauges to measure warp tension at different points across the reed during loom setup. Adjustments are made to the warp let-off motion and the lease rods to even out the tension distribution. These settings must be checked regularly, especially when changing from coarse to fine yarn counts.
This practice ensures that the loom operates at high efficiency and produces fabric with uniform shrinkage.