Knot Verification
Automated identification of manual joins made during winding prevents yarn breaks and surface defects in finished linen. Systemic piecing knot detection utilizes optical sensors to analyze the dimensions of yarn splices and hand-tied knots. When spinning or winding machines re-join a broken thread, the resulting knot creates a localized mass increase.
If the knot is too large, it will catch in the loom heddles or the reed during loom operations. These detectors ensure that only small, secure knots or splices pass through to the take-up package. In linen processing, where fiber stiffness makes hand-tied knots particularly bulky, this monitoring is highly important for preventing warp breaks.
Sensor Mechanism
Optical sensors monitor the silhouette of the moving yarn at high speeds to calculate the length and diameter of the knot. The piecing knot detection system compares these measurements against the preset limits stored in the winding machine computer. If the knot exceeds the allowable limits, the cutting blade is activated, and the yarn is spliced again automatically.
This closed-loop control guarantees that every join on the final bobbin meets the buyer’s quality standards. These cycles are logged to track the efficiency of each winding head.
Weaving Performance
High-speed looms require uniform yarn to prevent costly stoppages and maintain production efficiency. Large knots cause the warp yarn to snap when it is subjected to the high tensions of shed opening. By implementing reliable detection, mill operations experience fewer downtime events and produce higher-grade fabrics.
This monitoring is particularly important for linen fabrics where warp tension is high and fiber elasticity is low.