Mechanical Setting
The vertical distance traveled by the heald frame to create an opening for the weft insertion defines the mechanical range of the shedding motion. In linen production, heald stroke is calibrated to ensure the shed is large enough for the weft carrier to pass without abrading the warp yarns. High-tension flax warps require a precise stroke to minimize the fatigue caused by repeated bending and stretching.
Shed Geometry
Optimal shed height prevents the warp ends from clinging together, which is a common issue with hairy or under-sized flax yarns. If the heald stroke is insufficient, the weft carrier may strike the warp yarns, leading to broken ends and loom stoppages. Mill engineers often use a smaller stroke for high-speed looms to reduce vibration and mechanical wear on the cam or dobby drive.
This reduction in movement also helps maintain a higher loom speed by shortening the time required for each pick insertion. Excessive stroke length can overstretch the linen fibres, leading to permanent deformation or a loss of fabric elasticity.
Fabric Quality
Careful adjustment of this movement prevents the formation of weft loops or skipped picks in the finished linen cloth. Technicians record the heald stroke in the loom setup sheet to ensure reproducibility between different shifts.