Optical Distinction
Computerized imaging systems in textile quality control rely on the extraction of sharp boundaries to separate the selvage from the body of the fabric. During the optical scan of finished woven linen, edge disambiguation establishes the exact transition point where the dense, reinforced weave of the border ends and the lighter body weave begins. This division ensures that width measurements remain accurate to within one millimeter across the entire length of the roll.
Poor lighting or hairy yarn can obscure this boundary, which causes the system to record incorrect fabric widths, leading to false rejection of compliant material by the automated sorting line.
Processing Stage
The physical measurements are taken during the final inspection stage of linen manufacturing, when the fabric passes over the finishing table before packaging. Automatic scanners trace the fabric boundary continuously, recording data onto the final roll inspection certificate. Mill operators compare these values against the buyer’s acceptance criteria to verify that the roll conforms to shipment tolerances.
When the boundary is fuzzy, the software applies algorithms to filter out stray fibres and correctly place the edge.
Inspection Protocol
Quality managers use a manual check to verify that the scanner’s automated decisions match physical measurements. A technician measures the fabric at ten random points using a steel rule, then compares the results with the scanner’s log.