Deceleration Mechanism
Mechanical assemblies mounted on individual bobbin spindles prevent the uncontrolled rotation of supply packages when the warping machine stops. These creel brakes apply a consistent resisting force to each yarn end during deceleration to maintain uniform line tension. Failure to engage these units results in yarn tangling and overlapping, which creates defects in the subsequent weaving process.
Frictional Load
The friction generated by these devices depends on the specific mass of the linen yarn and the rotational velocity of the flange. Heavier counts require higher clamping pressure from the creel brakes to overcome greater rotational momentum. This pressure is often adjustable through a central spring or magnetic system to accommodate different lot specifications.
Synchronized Arrest
Coordination between the main drive and the individual spindle units ensures that every yarn end remains taut during an emergency stop. If the creel brakes fail to activate simultaneously with the headstock arrest, the slack ends drop and cross, necessitating manual clearing by the operator. Modern systems use pneumatic lines to trigger the brakes instantly across thousands of positions.
This rapid response preserves the alignment of the yarn sheet and prevents the formation of loops that would otherwise snag in the reed.