Grid Alignment
Spatial data registration across moving textile webs converts raw optical imagery into fixed geometric coordinates. Automatic fabric scanners perform coordinate mapping to assign two-dimensional positions to surface flaws detected during grey goods inspection. Quality control software records these physical positions relative to the cloth selvedge and roll origin.
Defect Localization
Inspection frames advance grey linen rolls at constant linear velocities while line-scan cameras capture continuous surface imagery across the full web width. The scanner processor calculates horizontal distance from the left edge guide and longitudinal distance from the seam header, establishing precise point data for slubs, pinholes or oil spots. These numerical coordinates populate the digital defect map attached to the mill roll record, allowing finishing technicians to locate and evaluate anomalies without re-scanning the entire bolt.
Physical flags or ink markings on the selvedge match the coordinate grid to guide cutting table operators.
Positional Tracking
Fabric export standards require clear identification of point defects to calculate total penalty points under the ten-point or four-point inspection method. Coordinate mapping establishes the objective spatial record used to negotiate quality allowances between weaving mills and international buyers. Defect clusters identified by coordinate mapping determine whether fabric rolls are approved for automatic garment cutting or diverted to manual slitting units.