Winding Regulation
Roving frames utilize a mechanical braking action on the bobbin to ensure the drawn flax roving wraps evenly onto the bobbin. This resistance, known as bobbin drag, governs the tension between the flyer and the bobbin. Mill floor operators in Chinese spinning facilities adjust the friction bands to prevent over-stretching of the delicate linen roving before it is sent to the wet spinning room.
The force is recorded in the daily spinning log as a percentage of standard tension limits.
Tension Calculation
Calculation of the required braking force depends on the changing diameter of the winding package as the roving builds up. Because flax fibers have low elasticity, an incorrect bobbin drag causes either slub formation or immediate roving breakage during the winding cycle. Engineers calculate the frictional resistance by measuring the coefficient of friction of the leather band against the bobbin spindle.
As the bobbin fills and grows heavier, the winding tension must be adjusted to keep the winding speed consistent with the delivery speed of the front rollers. In the buyer acceptance criteria, uneven density across the bobbin is flagged as a major defect, because it leads to uneven drawing in subsequent wet spinning stages.
Quality Impact
Improper yarn package density directly increases the rate of end-breaks during spinning.