Structural Deformation
Structural outward flexing of warp beam side discs occurs under the cumulative lateral pressure exerted by tightly wound yarn packages. Measured as the axial displacement of the outer rim relative to the hub, beam flange deflection directly affects the width uniformity of the yarn sheet. Heavy linen warps wound under high tension generate substantial lateral forces that push beam flanges outward, expanding the effective winding width as the beam diameter grows.
Density Variation
Sideways displacement of beam end plates disrupts yarn spacing near the selvedges during slasher sizing and loom mounting. As the flanges spread open, edge warp ends slide outward into the extra space, dropping yarn density per inch along the beam borders. When the yarn sheet unwinds on the loom, these slackened selvedge ends fail to maintain proper tension, creating loose edges and selvage puckering in the finished fabric.
Maintenance personnel measure flange gap expansion using optical laser meters or feeler gauges mounted at the beam rim under full load conditions.
Correction Threshold
Tolerance boundaries for beam disc displacement are constrained by maximum allowed selvedge density variance. Flange deflection exceeding two millimeters on a standard loom beam causes immediate selvedge tension failure during high-speed rapier insertion.