Drafting Capacity
Mechanical stretching of the softened flax sliver before twisting determines the final linear density and uniformity of the linen yarn. The maximum ratio of this elongation is governed by the wet spinning draft limit, which is the primary constraint in the production of fine yarn counts. This setting is recorded on the frame draft sheet to ensure that the drafting rollers do not exceed the cohesive strength of the wet fiber strand.
The limitation arises from the need to maintain control over both long and short fibres as they pass through the hot water bath.
Kinematic Action
Friction between the flax fibres must be carefully managed by adjusting the roller settings and water temperature. When the wet spinning draft limit is approached, the high draft forces can cause individual fibres to slip uncontrollably, leading to thin sections in the yarn. If the draft is set too high, the sliver will break completely before the twist can be inserted, resulting in machine downtime and increased waste.
The drafting roller wear is logged on the monthly spinning room maintenance report. Keeping the roller nip pressure uniform helps to prevent early sliver failure, especially when working with natural flax that has a variable wax content.
Process Threshold
High draft settings require highly parallelized and long scutched flax fibres of the highest grade. If the wet spinning draft limit is exceeded with a low-grade flax lot, the yarn will exhibit a high coefficient of variation and low tensile strength. This boundary is monitored using the online yarn clearer logs that record the frequency of thick places and slubs.
The machine operator must reduce the draft when the fiber quality drops.