Loom Accessory
Double-wire heddles provide two separate guide eyes on a single metal harness strand to control dense warp configurations in woven textiles. For high-density linen weaving, duplex heald wires allow parallel warp ends to be threaded close together without increasing the number of harness frames. Mill operators inspect these wires for smooth solder joints to prevent thread abrasion during high-speed shed changes.
Heddle Geometry
The offset arrangement of the dual eyes ensures that adjacent warp threads can move up and down without friction. In Chinese mills producing premium linen, each wire eye is checked against the yarn diameter to ensure the slubs in flax yarn do not catch during pick insertion. When weaving fine counts, the alignment of the wire eye directly affects the rate of warp breakage, and this measurement is logged daily in the loom maintenance report.
Defects decline.
Acceptance Criteria
Mill standards demand that heddles remain free of rust and surface roughness to bypass the yarn-friction threshold specified in the buyer’s manual. Releasing a batch of fabric requires testing the finished cloth for warp streaks under a standardized light box. If the duplex heald wires show wear, the harness frames are reconditioned before the next warp beam is mounted.