Chemical Pretreatment
Chemical extraction removes bound inorganic metal cations from raw flax fibres during wet preparation. In Chinese linen processing mills, acid demineralization utilizes dilute organic or mineral acid solutions to solubilize calcium and magnesium salts deposited during field retting. This washing process targets insoluble pectates bound within the middle lamella, preventing insoluble metal soaps from precipitating onto yarn surfaces during subsequent alkaline bleaching steps.
The scope of this treatment covers wet-spun yarn skeins and woven greige fabric prior to dyeing. It does not extend to synthetic fibre blends where mineral ash content remains negligible.
Metal Extraction Rate
Procedures for mineral solubilization rely on precise pH regulation and temperature control to preserve cellulosic molecular chain length while extracting bound cations. Mills run dilute sulfuric or citric acid liquors through circulating yarn dyeing machines at temperatures between forty and sixty degrees Celsius. Acid concentration determines the ionization of carboxyl groups on hemicellulose chains, releasing trapped iron ions into the bath solution.
If bath acidity drops below target thresholds, residual metal complexes cause uneven hydrogen peroxide decomposition during downstream bleaching operations. This catalytic breakdown degrades cellulose chains and generates localized pinholes in woven grey linen goods. Process logs document bath pH and liquor circulation rates before effluent neutralisation.
Standardized laboratory ash tests confirm mineral removal by measuring residual inorganic residue after high-temperature combustion.
Dyeing Defect Boundary
Uncontrolled acid exposure causes hydrolytic cleaving of beta-glucan bonds in flax cellulose. Tensile strength drops rapidly when bath pH falls below two for extended durations.